Good To Know . .

 

My NOKIA (via Partner) phone started downloading seven messages. The intrusion was not wanted and it was not information I needed to know or wanted to receive.

At the same time, I had my “Multi-Field EMF Meter” on my desk because I was doing some computer output testing. All of a sudden it started LOUDLY BEEPING and filling that little area with red; as this indicates how much one should begin panicking. Well, it was in super panic mode!

This is not an iPhone. It doesn’t have internet for surfing etc. 

So what is going on here?

Has the Jerusalem Municipality switched on the 5G network (after their ‘beautification street redos)?

GOOD TO KNOW

What material can block EMF?

Typical materials used for electromagnetic shielding are:

• pre-tin plated steel.
• carbon steel.
• copper (copper alloy 770)
• aluminium.
• nickel.
• zinc.
• nickel silver.

Does Aluminium foil reduce EMF?

Aluminum foil, or in this case aluminum mesh with holes small enough to block the wavelength, is highly effective at shielding, or blocking, EMF radiation.

Does aluminum foil block electromagnetic fields (EMF)?

https://www.defendershield.com 

Aluminum, the material that tin foil is made of, does conduct RF (Radio Frequency) and as a result, can block wireless EMF. Its effectiveness depends upon

Does Aluminum Foil Block EMF Radiation?

https://emfadvice.com › aluminum-foil-block-emf-radia...

Fact is that aluminum foil acts as a barrier or a shield and is, therefore, one of the most suitable materials for protection against non-ionizing radiation 

ARE THERE PLANTS THAT PROTECT ABSORB AND REPELL EMF RADIATION?  No, cacti or any other house plant WON’T protect you or block EMF radiation. There is A REAL SOLUTION that will protect both you and your plants

[https://noxtak.com/about-spiro/]  For years, we have heard and proved many of the stories and alleged solutions out there, and they were the inspiration behind our curiosity-led scientific work. We understand that EMFs are inescapable and, as they are inherent in our technologies’ functioning, unblockable. With this approach, we worked on a solution that helped us contributing to a cleaner environment while encouraging the use and development of technologies.

SPIRO is a nanotechnology-based material that has been certified by several independent laboratories around the world. It is the only scientifically proven, patented, and multi-awarded solution that does not “attract,” absorb, or block artificial EMF but filters its artificial polarization and makes it behave the same way as the natural electromagnetic fields (the ones emitted by the earth).

SPIRO has proven to be an effective solution to neutralize the harmful effects of electromagnetic pollution, which not only protects our health but regulates several bodily functions that are commonly disrupted by electrosmog and helps to protect the delicate balance of ecosystems and living beings.

So, if you are looking for a solution that equally protects you, your pets, your precious plants, and even your favorite electronic devices, SPIRO is for you. Go to our products section to know more about our technology and all the solutions we have available for all the different needs.

The electromagnetic problem lies in the fundamental disturbance that is created by the artificial polarization of electromagnetic waves when they are modulated for the transmission of messages in telecommunications.

This results in an abnormal propagation pattern of radiation and accumulation of parasitic interferences in the environment, which together with the electrical transmission network in the buildings -flawed by interferences that flow in the electrical wiring as a result of the alternation of the current (AC)- and static problems due to a lack of properly installed and grounded systems in the building, create the phenomenon called electrosmog or electro-pollution.

https://noxtak.com/about-spiro

Understanding the electrosmog values of high frequency, low frequency, as well as near and far fields of radiation, dirty electricity, static problems, and multiple interferences can be challenging for an average person without specialized technical training and, in many cases, ends up being highly confusing. Most of the people who buy simple electromagnetic radiation meters to measure their homes do not really understand what they are measuring and, even less, how the devices work or why they get such values. All of this leads to wrong conclusions and irrational or simplistic expectations that, ultimately, can lead the person to develop negative psychological conditioning and paranoia for inhabiting any space in which their radiation meter shows “unusual” values.

However, for practical purposes and to simplify this for people with no technical knowlege, we have developed a cross-equivalence of values that combine all these variables and we have converted such values into a numerical equivalence as a simple guide to classifying environments and classifying our products, all based on in the equivalent filtering potency required for one type of electrosmog or another.

In this way, Filtering Power (potency) 1 corresponds to a Pollution potency of 1. The SPIRO® Filtering Power (potency) starts with NOXTAK’s smallest product, the SPIRO® CARD, made up of 3 films grouped in a triangular pattern. This product represents an equivalent filtering power in electromagnetic pollution values of:

• High Frequency, Power Density: 0.73 uW / cm2
• Magnetic Flux Wireless Devices: 2,000 mGauss
• Alternating Magnetic Flux: 3 mGauss
• Dirty Electricity: 100 milliVolts unweighted> 60 Hz and <10 MHz.
• DPA Index of 3 (Data Package Alterations)

It is because of this that SPIRO users can estimate the filtering potency they have by using this product as a reference, or if they have multiple SPIRO products grouped together they can take advantage of it and multiply the potency. The rule is that the more SPIRO films are grouped together, the greater the filtering potency is.

On the other hand, when we talk in terms of how much exposure potency exists in our cities and homes, it’s important to point out that the values are variable during the day depending on the person’s work environment, whether he/she works outdoors or in a closed space, the amount of dirty electricity (harmonics and transients) in the electrical wiring of the building, the volume of wireless devices in the building, proximity to mobile phone towers and/or high voltage lines, among other factors.

Following the standard described above (our numerical equivalence in which Filtering Power (FP) 1 corresponds to a Pollution potency (PP) of 1),  we could say that the pollution potency to which an average individual is exposed when using their own wireless devices, ranges from 0.3 to 0.9 PP. If we add the nearby devices of other individuals, proximity to mobile phone antennas, and other radiofrequency and microwave devices, that pollution potency can rise to 2.5 with peaks of up to 7.1 PP. On top of that, there’s the nearby pollution coming from electrical wiring with high values of dirty electricity, such as in a bedroom or a workplace, which can cause higher variable exposures that go up to 18 PP. Then, we have the semi-industrial exposures with pollution potencies between 38 and 55 PP; and, finally, the industrial exposure that can range between 75 and 150 PP. 

https://noxtak.com/about-spiro

________________________________

GOOD TO KNOW

RESEARCH PAPER:  Aluminum Foil Shield Diminishes the Electromagnetic Radiation of Mobile Phones in the Cerebellum of Adult Male Rats [https://repository.unair.ac.id/96412/1/Aluminium%20Foil%20shield%20Diminishes%20the%20Electromagnetic%20Radiation%20Mobile%20Phones%20in%20the%20Cerebellum%20of%20Adult%20Male%20Rats.pdf] 

READ THE CONCLUSION